116
NexLog Recorder User Manual v2.2.0
Edit
: The Add and Duplicate Page also take you to a page with the same
parameters as 'Edit', though for a new schedule rather than an existing one, so
the parameters described below are valid for those pages as well. The
configurable parameters for a scheduled event are as follows:
Schedule Heading
Description
: A User Friendly Description of what this scheduled event is
Enabled
: IF not checked, this schedule is disabled and will not have any effect
until enabled.
Channel
: Used for scheduled events where the action is "Start Recording" or
"Disable Recording". This determines the number of the channel upon which
recording will be started or disabled
Scripting Tag
: For use with custom scripting and Eventide integrations, it
associates a static piece of data with the notification.
Activation / Expiration Heading
Activate Now
: If checked the schedule becomes immediately active. If disabled,
the Start Time becomes option below becomes available for editing. There you
can use the calendar control and hour / minute /second boxes to set a start
time. Note that all times are configured on this page should be in your currently
configured local time zone (not UTC). The current time zone is listed in the
heading above for convenience
Never expires
: If checked, the schedule never expires, otherwise the Expire
Time option below becomes available. It works identically to the Start Time
parameter.
Action Heading
The radio buttons in this section allow you to specify the action that will take
place when the schedule fires. The options are described below:
Start Recording
: Recording will start on the channel specified above in the
"Channel" parameter whenever the schedule fires and will continue recording for
the duration configured below, at which time it will stop recording. Note that in
addition to configuring the schedule here, the channel must be configured for
"Scheduled" in the Call Detect Type (configured under Recording: Boards).
Disable Recording
: "Record On Demand" For the channel will be disabled when
the schedule fires and re-enabled after the duration. During this time the
channel will not record, at all other times it will record based on its normal call
detect types.
Send Notification
: Triggers a notification event for use with custom scripting
and Eventide integrations.