142
NexLog Recorder User Manual v2.2.0
9013
Failed to open channel <~111~> on the board of
type <~110~>. Error: <~112~>
WARNING
9014
Failed to configure channel <~111~> on the board
of type <~110~>. Error: <~112~>
WARNING
9016
No signal present on channel <~111~> on the board
of type <~110~>.
WARNING
9017
Recording could not be started on channel <~111~>
on the board of type <~110~>.
WARNING
9018
Recording could not be stopped on channel <~111~>
on the board of type <~110~>.
WARNING
9019
Read timeout on channel <~111~> on the board of
type <~110~>.
ERROR
9020
Read fail on channel <~111~> on the board of type
<~110~>.
ERROR
9021 Continuity check error on channel <~110~>.
ERROR
9022
The continuity number is not being updated on
channel <~110~>.
SEVERE
9023
<~110~>(<~111~>) has not been heard from in
<~112~> seconds. The recorder may not be
recording.
SEVERE
9024
Analog Telephony Board <~110~> has malfunctioned
and has been disabled
SEVERE
9025
Recording Interface is configured as disabled and
not recording. Enable the device to begin
recording
SEVERE
9026
One or More Digital PBX Channels are receiving a
large number of line errors. Please check your
wiring and phonesets
WARNING
9100
The recorder is experiencing a connection error
with the remote gateway at address <~110~>. Error:
<~111~>
ERROR
9101
The recorder lost the connection to the remote
gateway at address <~110~>.
ERROR
9102
The Remote Gateway at address <~110~> contains a
backlog of data that is <~111~> minutes old. The
data is currently being uploaded
ERROR