NexLog Recorder User Manual v2.2.0
31
The moving scrub can be used to set the exact point of playback. Click
and drag it to move it around.
The arrow keys to the left of the scrub area can be clicked to skip
playback forward or skip playback back by a configured interval.
The pointers just above the scrub control can be dragged for exact
placement of loop boundaries.
In the Transport area at the bottom of the screen, the Play/Pause button
begins or pauses playback,
The Next and Previous buttons can be used to jump to the next or
previous recording,
The Loop button is used to enable or disable looped playback.
The AGC button toggles the playback automatic gain control on/off.
If playback of more than one simultaneous recording at a time ("mixed
playback") is desired:
1.
Create an Incident of the desired recordings as described below in the
“Incidents” section.
2.
On the Working Incident page, an additional playback mode button
allows selection of mixed play.
3.
Click on any recording in the working incident to begin mixed playback.
Incidents
Incidents are a useful way to handle collections of related recordings.
Figure 13
—Incident