NexLog Recorder User Manual v2.2.0
103
SEARCH-ENTITY
: An Entity was searched
START-RECORDING
: A user forced recording to start on a channel (this
usually happens from a SOAP integration with the recorder)
STOP-RECORDING
: A user forced recording to stop on a channel (this
usually happens from a SOAP integration with the recorder)
ROD-DISABLE
: A user forced a channel into a non-recording mode (this
usually happens from a SOAP integration with the recorder)
ROD-ENABLE
: A user switched a channel back to its standard recording
mode (this usually happens from a SOAP integration with the recorder)
OPEN-TRAY
: A user ejected an archive drive
CLOSE-TRAY
: A user injected an archive drive
ACKNOWLEDGE-ALERT
: A user acknowledged an alert
SET-CHANNEL-METADATA
: A user added metadata to be applied to each
media record on a channel (this usually happens from a SOAP integration
with the recorder)
SET-CALL-METADATA
: A user added metadata to a specific call (this
usually happens from a SOAP integration with the recorder)
SET-WORKSTATION-TAG
: User set workstation tag for channel. (this
usually happens from a SOAP integration with the recorder).
UNSET-WORKSTATION-TAG
: User unset workstation tag for channel. (this
usually happens from a SOAP integration with the recorder).
CHANGE-PASS
: A user changed their pass (or someone else’s if they are an
admin)
EXPORT-SYSTEM-INFO
: A user took a backup of system information either
to an archive drive or via download to a web browser.
IMPORT-SYSTEM-INFO
: A user uploaded or restored system information
OFFLINE-DISK-FROM-RAID
: A user marked a drive for removal
ADD-DISK-TO-RAID
: A user added a new drive to a RAID
BOND-NICS
: A user bonded 2 network interfaces together into 1 interface
(this is advanced behavior for certain logger configurations and is not typical
to see)
START-ARCHIVING
: A user started archiving on an archive device
STOP-ARCHIVING
: A user stopped archiving
BROWSE-ARCHIVE
: A user put an archive into Browse mode for viewing
with the Front Panel or with client software
UNBROWSE-ARCHIVE
: A user took a browsed archive back offline