manualshive.com logo in svg

Epson S1C17602, Техническое руководство

Эпсон S1C17602 - мощный микроконтроллер для различных устройств. Ознакомьтесь с техническим руководством, чтобы получить подробную информацию о функциях и возможностях этого устройства. Скачайте бесплатное руководство пользователя с нашего сайта, чтобы использовать все возможности Epson S1C17602.

Поделиться
Скачать
background image

24  a/D COnVeRTeR (aDC10)

24-8

 

Seiko epson Corporation 

S1C17624/604/622/602/621 TeChniCal Manual

Conversion completion interrupt

 

To use this interrupt, set ADCIE/ADC10_CTL register to 1. If ADCIE is set to 0 (default), interrupt requests for 
this cause will not be sent to the ITC.

 

When A/D conversion in a channel has completed, the A/D converter sets ADCF/ADC10_CTL register to 1, 
indicating that the converted data can be read out. If conversion completion interrupts are enabled (ADCIE = 1), 
an interrupt request is sent simultaneously to the ITC.

 

An interrupt occurs if other interrupt conditions are met. 

 

You can inspect ADCF in the ADC10 interrupt handler routine to determine whether the ADC10 interrupt is 
attributable to a completion of conversion. If ADCF is 1, the converted data can be read out from ADD[15:0]/
ADC10_ADD  register  by  the  interrupt  handler  routine. The  interrupt  cause ADCF  is  reset  to  0  by  reading 
ADD[15:0] and this interrupt will not be generated until the subsequent conversion has completed.

Conversion data overwrite error interrupt 

 

To use this interrupt, set ADOIE/ADC10_CTL register to 1. If ADOIE is set to 0 (default), interrupt requests 
for this cause will not be sent to the ITC.

 

If the following A/D conversion has completed when ADD[15:0] has not been read (ADCF = 1), the A/D con-
verter  sets ADOWE/ADC10_CTL  register  to  1,  indicating  that ADD[15:0]  is  overwritten.  If  conversion  data 
overwrite error interrupts are enabled (ADOIE = 1), an interrupt request is sent simultaneously to the ITC.

 

An interrupt occurs if other interrupt conditions are met. 

 

You can inspect ADOWE in the ADC10 interrupt handler routine to determine whether the ADC10 interrupt is 
attributable to an overwrite error. If ADOWE is 1, perform error handling by the interrupt handler routine. The 
interrupt cause ADOWE is reset to 0 by writing 1.

For more information on interrupt processing, see the “Interrupt Controller (ITC)” chapter.

notes:  •  To  prevent  interrupt  recurrences,  the  ADCF/ADC10_CTL  register  and  ADOWE/ADC10_CTL 

register must be reset in the interrupt handler routine after an ADC10 interrupt has occurred.

 

•  To prevent unwanted interrupts, reset ADCF and ADOWE before enabling interrupts with AD-

CIE/ADC10_CTL register and ADOIE/ADC10_CTL register.

Control Register Details

24.6  

6.1  List of ADC10 Registers

Table 24.

address

Register name

Function

0x5380

ADC10_ADD

A/D Conversion Result Register

A/D converted data

0x5382

ADC10_TRG

A/D Trigger/Channel Select Register

Sets start/end channels and conversion mode.

0x5384

ADC10_CTL

A/D Control/Status Register

Controls A/D converter and indicates conversion status.

0x5386

ADC_DIV

A/D Clock Control Register

Controls A/D converter clock.

The A/D converter registers are described in detail below. These are 16-bit registers.

note:  When data is written to the registers, the “Reserved” bits must always be written as 0 and not 1.

a/D Conversion Result Register (aDC10_aDD) 

Register name address

Bit

name

Function

Setting

init. R/W

Remarks

a/D Conversion 
Result Register
(aDC10_aDD)

0x5380

(16 bits)

D15–0 aDD[15:0] A/D converted data

ADD[9:0] are effective when 
STMD = 0 (ADD[15:10] = 0)
ADD[15:6] are effective when 
STMD = 1 (ADD[5:0] = 0)

0x0 to 0x3ff

0x0

R

D[15:0]   aDD[15:0]: a/D Converted Data Bits

 

The A/D conversion results are stored. (Default: 0x0)

 

The  data  alignment  in  this  16-bit  register  (conversion  result  storing  mode)  can  be  selected  using  the 
STMD/ADC10_TRG register. 

Содержание S1C17602

















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S1C17602

Badger Meter PC100 Installation And Operation Manual preview
PC100
Бренд: Badger Meter Страницы: 20
Parkside PDWE 8 A1 Instructions Manual preview
PDWE 8 A1
Бренд: Parkside Страницы: 86
LMI Technologies Liquitron DP5000-01A Instruction Manual preview
Liquitron DP5000-01A
Бренд: LMI Technologies Страницы: 28
Ros IC-15X Operation And Maintenance Manual preview
IC-15X
Бренд: Ros Страницы: 10
Vimar by-me Eikon 20526 Quick Start Manual preview
by-me Eikon 20526
Бренд: Vimar Страницы: 6
J+J J4C 20 Assembly Instructions Manual preview
J4C 20
Бренд: J+J Страницы: 6
Harsen GU641A Operation Manual preview
GU641A
Бренд: Harsen Страницы: 55
Wabtec Ricon 55914 Installation Instructions preview
Ricon 55914
Бренд: Wabtec Страницы: 5
Kelly MiniKLS7210NV User Manual preview
MiniKLS7210NV
Бренд: Kelly Страницы: 36
Zaber T-CON3 User Manual preview
T-CON3
Бренд: Zaber Страницы: 23
NXP Semiconductors MPC57xx Application Note preview
MPC57xx
Бренд: NXP Semiconductors Страницы: 11
Aaeon BOXER-6614 Manual preview
BOXER-6614
Бренд: Aaeon Страницы: 116
V2 PESO-230V Manual preview
PESO-230V
Бренд: V2 Страницы: 108
Galletti CSW 186 Manual preview
CSW 186
Бренд: Galletti Страницы: 8
IAI DeviceNet MSEL Series Operation Manuals preview
DeviceNet MSEL Series
Бренд: IAI Страницы: 144
Resol DeltaSol MiniPool Manual preview
DeltaSol MiniPool
Бренд: Resol Страницы: 16
Gewiss Chorus GW 90 740 Manual preview
Chorus GW 90 740
Бренд: Gewiss Страницы: 44
Sunricher SR-ZV9080A-B Manual preview
SR-ZV9080A-B
Бренд: Sunricher Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды