Epson DM-M820, Техническое справочное руководство

Страница: 7 / 324

Rev. I v
MR Series Technical Reference Manual
Important Safety Information
This section presents important information intended to ensure safe and effective use of this
product. Read this section carefully, and store it in an accessible location.
Key to Symbols
The symbols in this manual are identified by their level of importance, as defined below. Read
the following carefully before handling the product.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.
CAUTION:
Cautions must be observed to avoid minor injury to yourself or damage to your
equipment.
Safety Precautions for the IM-800
WARNING:
If you are using 100-127 V power, set the AC voltage select switch to 115.
If you are using 200-240 V power, set the AC voltage select switch to 230. (The factory
setting is 230.) If the setting is wrong, the system will be damaged and will not operate.
(For the standard model)
Unplug the power cable immediately if the IM-800 produces smoke, a strange odor, or
unusual noise. Continued use may lead to fire or electric shock. Contact your dealer or
an EPSON service center for advice.
Never insert or disconnect the power plug with wet hands. Doing so may result in severe
shock.
Do not allow foreign objects to fall into this product. Penetration by foreign objects may
lead to fire or shock.
If water or other liquid spills into this product, turn off the front power switch, unplug the
power cable immediately, and then contact your dealer or an EPSON service center for
advice. Continued usage may lead to fire or shock.
Always supply power directly from a standard domestic power outlet.
Do not place multiple loads on the power outlet (wall outlet). Overloading the outlet
may lead to fire.
The equipment must be installed near the electrical outlet, and the outlet must be easily
accessible.
Do not attempt to open or disassemble the internal lithium battery. This could result in
burns or release of hazardous chemicals.