manualshive.com logo in svg

Epson DM-M820, Техническое справочное руководство

Epson DM-M820 - техническое руководство для этого продукта доступно для загрузки бесплатно на нашем сайте. Пользователь может найти подробную информацию в Technical Reference Manual и скачать руководство с нашего веб-сайта. Узнайте больше о функциях и настройках Epson DM-M820, заглянув на manualshive.com.

Поделиться
Скачать
background image

5-8

   BIOS Functions

Rev. I

Boot Other 
Device

Even if a device search is performed in the order of First/Second/Third Boot Devices, and a 
device that is capable of performing the startup is not found, this setting can be used to 
execute/not execute the Boot Other Device function. The default setting is set as “Enabled”. 
Change the setting so that it is compatible with the system configuration.
Enabled:This setting is used to search for another device that is capable of performing the 

startup.

Disabled:This setting is used to disable the search for another device that is capable of 

performing the startup.

Reference: Information concerning the boot sequence
If bootable SCSI drives (e.g., HDD and CD-ROM) are connected, some products give priority to 
such SCSI Drives regardless of the First Boot Device, Second Boot Device, Third Boot Device, 
and Boot Other Device settings. This is due to the specifications of the SCSI BIOS (adapters) in 
question.

Boot Up Floppy 
Seek

This setting is used to enable/disable the head seek test (either execute or not execute the 
head seek command) for floppy drive A during the startup. The default setting is “Enabled”.
Enabled:This setting is used to execute the head seek test. If the Standard CMOS Features: Drive 

is set as “None” and the Integrated Peripherals: Onboard FDC Controller is changed to 
“Disabled”, then if the Standard CMOS Features: Halt On is set as “All Errors” or the All, 
But Keyboard setting is used, system errors will halt.

Disabled:This setting is used to disable the head seek test. Although this setting will reduce the 

amount of time required to perform the head seek for the floppy during startup, it does 
not perform an accurate error detection of FDD errors.

Boot Up 
NumLock Status

This setting turns the NumLock on the keyboard On or OFF (executes or does not execute the 
NumLock command). The default setting is “OFF”.
Off:

This setting is used to turn the NumLock Off.

On:

This setting is used to turn the NumLock On.

Gate A20 
Option

This setting is used to set the access method for a memory space of more than 1MB. The default 
setting should be “Normal” for Fail-Safe and “Fast” for Optimized.
Normal: This setting is used only for access methods (real mode access) Pertaining to the 

conventional AT transposing apparatus which use a keyboard controller.

Fast:

This setting is used for the Gate A20 function for the chip set. This is the original setting 
used to perform automatic switching between the real mode and the protect mode.

Typematic Rate 
Setting

This setting is used to enable/disable changes to the repeat conditions. The default setting is 
“Disabled”.
Disabled:This setting is used when the apparatus is to be used at a fixed setting, without 

changing the number of repetitions or the intervals between repetitions. For the fixed 
setting, a repetition occurs once every 6 seconds with intervals of 250 msec. This is the 
normal setting.

Enabled:This setting is used when the number of repetitions and the intervals between 

repetitions is changed. For details, refer to Typematic Rate (Chars/Sec.) and 
Typematic Delay (Msec).

Typematic Rate 
(Chars/Sec)

This setting is used by to determine how many times an entry is made in a one-second period 
when a key is held down. The fixed setting is 6 times per second. Additional settings are 8, 10, 12, 
15, 20, 24 and 30.

Typematic 
Delay (Msec)

This setting is used to set the number of Msec for the intervals between data when a key is held 
down. The fixed setting is 250 Msec. Additional settings are 500, 750 and 1000.

Table A-3 Advanced BIOS Features menu (continued)

Items

Description

Содержание DM-M820





































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DM-M820

Casio CE-285 Operator'S Instruction Manual preview
CE-285
Бренд: Casio Страницы: 98
daviteq WS433-LPC User Manual preview
WS433-LPC
Бренд: daviteq Страницы: 17
EC Line EC-CD-200M User Manual preview
EC-CD-200M
Бренд: EC Line Страницы: 2
Casio TK-T200 Service Manual preview
TK-T200
Бренд: Casio Страницы: 3
DESIGN CONCEPTS 8000 Operator'S Manual preview
8000
Бренд: DESIGN CONCEPTS Страницы: 14
Fast Forward EnergyCam RS 232 Quick Start Manual preview
EnergyCam RS 232
Бренд: Fast Forward Страницы: 2
Magnescale LY72 Quick Start Manual preview
LY72
Бренд: Magnescale Страницы: 2
Sam4s SPS-520 Basic Operations preview
SPS-520
Бренд: Sam4s Страницы: 5
Sam4s ER-180U Series Operator'S And Programming Manual preview
ER-180U Series
Бренд: Sam4s Страницы: 95
Olympia CM 910 Operating Instructions preview
CM 910
Бренд: Olympia Страницы: 5
Ultima Displays Tornado Assembly Instructions preview
Tornado
Бренд: Ultima Displays Страницы: 2
Yatai JC Series User Manual preview
JC Series
Бренд: Yatai Страницы: 3
NAiS LC4H-SV Documentation preview
LC4H-SV
Бренд: NAiS Страницы: 9
ACLAS CR35(B) Quick Start Manual preview
CR35(B)
Бренд: ACLAS Страницы: 6
Rion KL-04 Instruction Manual preview
KL-04
Бренд: Rion Страницы: 166
MEI Cashflow SC83 Series Installation & Operation Manual preview
Cashflow SC83 Series
Бренд: MEI Страницы: 30
MULTISPAN MMC-1046RD Operating Manual preview
MMC-1046RD
Бренд: MULTISPAN Страницы: 4
MZ electronic WHC040 Instructions For Use Manual preview
WHC040
Бренд: MZ electronic Страницы: 76

Бренды по названию

Популярные бренды

Загрузить еще бренды