Epson DM-M820, Техническое справочное руководство

Страница: 139 / 324

Rev. I OS and Drivers 4-89
MR Series Technical Reference Manual
this file should be specified as [.PKL]. The format has the following sections and entries:
When nothing is described after the entry, the entry setting is deleted.
For Sysparam00 and CodeDefinition00, set numeric numbers in a range from 00 to 99. Set the numeric values one
by one in ascending order. Do not input the same numeric value for more than one.
File format
Section Entry
Parameter
(underlined parameters
are the default values)
Remarks
[General] Fixed value. Be sure to describe at the start.
Version PKL100 Fixed value. Be sure to describe at the start.
IgnoreCommands Selected from Off and On Be careful that if On is selected, the subsequent
commands are not accepted.
SystemParam00 Set in the Offset and Value formats.
00h < Offset
≤
FFh, 00h
≤
Value
≤
FFh
[MSR]
ValidTracks Selected from 1, 2, and 3 Selection of more than one value may be
selected.
Beep On, Off
CodeType US, JP, FR, GR, SP
CardStart For information on input enabled characters, see
SS/ES Code Input Enabled Characters.
[<, >, |] are characters and can be input.
Input the hexadecimal as [\nn] within a range
from [01h] to [7Fh].
Effective up to 7 characters. The 8th character
and those thereafter are neglected.
Because even the line-feed character is
effective, do not carelessly input a space or a
tab.
CardEnd
Track1Start
Track1End
Track2Start
Track2End
Track3Start
Track3End
JIS2Start
JIS2End
CodeDefinition00 See “Code Conversion Entry” on page 4-90 for
further details.