Epson DM-M820, Техническое справочное руководство, Страница: 101 / 324

Rev. I OS and Drivers 4-51
MR Series Technical Reference Manual
Uninstalling the MSR utility
for Windows
Uninstall the MSR Utility by the following procedure.
1. Select [Start Menu] - [Settings] and open the control panel.
2. Select [Add/Remove Hardware] in the control panel.
3. Select [DM-MS Series Configuration Utilities].
4. Click Add/Remove .
5. The confirmation dialog box of the uninstalling is displayed. Select Yes .
6. Uninstalling is completed, and the dialog box is displayed. Click OK .
Installing the MSR Utility for MS-DOS
This is installed by the exclusive installation program.
1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive. Start
Common\Msrcfg\Dos\INSTALL.BAT.
2. The file is copied on the C:\Msrcfg\ directory.
Setting of Windows and Drivers
Touch Panel Driver for Windows
Note
When using the touch panel driver, be sure not to install the mouseware. If you install the mouseware,
there is a possibility that you cannot use the touch panel driver correctly.
Calibrating the touch panel
The touch panel calibration refers to the setting for matching the physical position taken when
the operator presses the touch panel with the software position recognized by the computer.
The touch panel calibration is executed when the touch point of the touch panel is displayed.
The touch panel calibration on Windows 2000 is executed by using the following procedure:
1. Start Windows.