Epson DM-M820, Техническое справочное руководство

Страница: 41 / 324

Rev. I Setup for the IM-800 and the DM-M820 2-7
MR Series Technical Reference Manual
Attaching the Rear Cover
The rear cover makes the back of the system look neat and protects the cables.
1. When you want the cables to exit the top of the rear cover, use pliers to break out the tabs.
CAUTION:
If burrs are left after the tabs are removed, they may cause cuts or scratches.
Remove the burrs with a cutter or file.
2. Remove the screw from the lower right corner of the back of the unit.
3. Fit the tabs on the rear cover as shown below.
4. Attach with three screws, including the one you removed, in the locations shown below.
tabs