JCM GOLD G-105 Скачать руководство пользователя страница 1

Страница: 1 / 42

BEFORE OPERATING THE REGISTER

1-1 General Precautions

The shock of impact can damage the register, Install the register on a stable and level
place.

Do not move the register with the power ON.

Be careful not to spill liquids on the register, or drop metallic objects such as paper clips
into it.

To clean the register, wipe it with a soft, dry cloth, Do not use solvents such as
thinner, alcohol or benzene.

If you leave the register unused for a long time, unplug the power cord.

1-2 Choosing a Location for the Register

Avoid locations where the register would be exposed to:
-

excessive dust

vibration

high humidity

extremely high or low temperature

rapid changes in temperature direct sunlight

direct heat from a heating appliance

CAUTION : Do not use this cash register outdoors in the rain or near any source of

liquid

If the register is used near a radio or television set, it may interfere with reception. If

this problem occurs, try reorienting the register or the TV/radio antenna, or move the
register away from the set.

1-3 Power

The register rated at 220V runs on standard power from wall outlet.

Do not connect the register to the same outlet as a heavy-duty appliance that

generates electrical noise, such as refrigerator or air conditioner.

Содержание G-105











































Результаты поиска

Содержание G-105

Отзывы:

Похожие инструкции для G-105

Бренды по названию

Популярные бренды

JCM GOLD G-105, Руководство пользователя

Результаты поиска

Содержание G-105

Отзывы:

Похожие инструкции для G-105

Бренды по названию

Популярные бренды