Aurorean Installation & Service Guide
23
Chapter 2
Mounting the ANG/APS-3000/7000
Mounting & Connecting Systems
Secure the System to the Rack
Use the screws provided with the rack to fasten the system’s front flanges to
the rack as shown in Figure 17.
Figure 17
System Fastened to Rack
Removing the System From the Rack
If you need to remove the system from the rack perform the following steps:
1
Unscrew the two screws holding the system flanges to the rack.
2
Slide the system out of the rack as far as possible.
3
When the assembly locks, press the lock arm on both sides of the
rails to release the system as shown in Figure 18.
4
Remove the system from the rack.
Fasten server using screws supplied with rack