Aurorean Installation & Service Guide
73
Chapter 3
Configuring the Remote ANG-3000/7000
Installing Software & Setting Networking Configurables
4
Click Add Subnet.
Configuring Name Server Parameters
Name Server settings are optional. If you do not use DNS or WINS servers on
your network, skip to “Configuring Authentication Parameters” on page 74.
To set the Name Server parameters of the ANG, perform the following steps:
1
Click on the Name Servers option.
The Name Servers Configuration window appears as shown in
Figure 52.
Figure 52
ANG Name Servers Configuration Window
2
Enter an IP address for the Primary and Secondary DNS servers in
the fields provided.
3
Enter an IP address for the Primary and Secondary WINS servers in
the fields provided.
4
Click Apply Changes.