64
Aurorean Installation & Service Guide
Configuring General Values of the ANG-3000/7000
Chapter 3
Installing Software & Setting Networking Configurables
!
Bring up a Web browser and enter the location http://192.168.1.2?
!
Click General when the Aurorean Web Config appears?
!
Enter the information exactly as it appears on your VPN
Configuration Worksheet? If you did not receive the worksheet, enter
the information as solicited.
!
Check Local if you were configuring an APS/ANG-3000/7000 pair
and Remote if you were configuring a stand-alone remote
ANG-3000/7000?
!
Enter the APS IP address, if you are configuring a local
ANG-3000/7000? otherwise, the address defaults to the trusted IP
address of the ANG.
!
Click the Apply Changes button?
!
Click the Restart button?
If you successfully completed these steps, do the following:
!
Continue ANG-3000/7000 configuration if you are setting up a remote
ANG by going to “Configuring the Remote ANG-3000/7000” on
page 65.