Aurorean Installation & Service Guide
15
Chapter 2
Mounting the ANG/APS-3000/7000
Mounting & Connecting Systems
2
Orient the system with the brackets aligned with the desired mounting
holes in the rack posts as shown in Figure 8.
3
Insert a screw through each bracket and loosely attach to the rack
posts. Do not tighten.
4
Properly align the system in the rack and securely tighten the screws
to the rack posts.
Figure 8
Attaching the Mounting Brackets
CAUTION
Do not block the vents at the front and rear of the server. For electrical
safety, verify that the branch circuit supplying power to equipment in the
rack can accommodate the addition of the server. The rack should be
properly grounded to an Earth ground; connect the Aurorean Virtual
Network system to this ground path.