8 Katom St., Misgav Industrial Park, 2017400, Israel
Tel: +972-4-9951999; Fax: +972-4-9990287
PM0617.08 - CXE2000/CXE3000 CompletePBX Getting Started Guide (electronic version)
Page
1
of
7
CXE2000/CXE3000 CompletePBX: Getting Started Guide
Package Contents
CXE2000/CXE3000 (2U 19'' width
unit)
Power cord
Support hardware for 19'' cabinet
CompletePBX 5 software preinstalled
on the hardware
Prerequisites
You need a computer equipped with an Internet browser. Firefox is recommended.
Step 1: Earthing the Unit
1)
For safety and performance reasons, it is essential to ground the unit.
Note: Not properly grounding this device will void your warranty!
2)
Use a star washer to securely connect a grounding tab to the grounding screw on the rear
panel.
3)
Using 12-16 gauge wire, connect the grounding tab to a reliable ground.
4)
All Xorcom hardware should be connected to a common grounding point.
Figure 1: Detail of CXE2000 Rear Panel
Figure 2: Detail of CXE3000 Rear Panel
Step 2: Powering Up the Unit
1.
Connect a keyboard and a VGA/SVGA screen.
2.
Connect the unit to the LAN.
3.
Connect the power cord to the power input socket on the rear panel.
4.
Turn on the power using the power button on the front panel.
5.
The startup process takes about 2 minutes. The startup time depends on the number of
telephony ports installed in your CXE2000/CXE3000 unit.
Grounding
Power Supply
Power
Supply
nic0
nic1
Grounding
nic0
nic1
IPMI
