Aurorean Installation & Service Guide
75
Chapter 3
Configuring the Remote ANG-3000/7000
Installing Software & Setting Networking Configurables
CAUTION
The default configuration contains two groups: IRAdmin and DEFAULT.
Do not delete
IRADMIN or you will not be able to log on to the ANG.
Figure 54
ANG Add Group Window
4
Add a Group Name.
There is no character limit to group names and they may contain
letters, numbers, and some symbols.
NOTE
The following symbols are not permitted in the Group Name field: comma
(,), plus sign (+), at sign (@), space, Tab, single (‘) and double quotes (“), space,
apostrophe (‘), tilde (~), percent sign (%), ampersand (&), exclamation point (!),
backslash (|), forward slash (/), and asterisk (*).
5
Add an IP Address.
If you intend to have site-to-site users access a virtual subnet IP
address pool and have already created that pool on the terminating
ANG, scroll down to and select the combined IP address/net mask.
To create a group which will include users with static IP addresses,
leave this field with the default NULL/NULL selected.
6
Click Add Group.
