Endress+Hauser Liquiline System CA80AM, Руководство по эксплуатации

Страница: 75 / 204

Liquiline System CA80AM Operation
Hauser
75
Data logbooks For connected Memosens sensors (optional)
New You can create a maximum of 8 data logbooks.
Logbook name Customized text,
20 characters
Source of data Options
• Controller
• Fieldbus signals
• Mathematical functions
Factory setting
None
Select a data source for the logbook entries. You can
choose from connected sensors, available controllers,
current inputs, field bus signals and mathematical
functions.
Measured value Options
• Depends on Source of
data
Factory setting
None
You can record different measured values depending on
the source of data.
Scan time 00:00:01 ... 01:00:00
Factory setting
00:01:00
Minimum interval between two entries
Format: HH:MM:SS
Data logbook Options
• Off
• Ring buffer
• Fill up buffer
Factory setting
Off
Ring buffer
If the memory is full, the latest entry automatically
overwrites the oldest entry.
Fill up buffer
If the memory is full, there is an overflow, i.e. no new
values can be saved. The controller displays a
corresponding diagnostic message. The memory then
has to be cleared manually.
Overflow warning
Data logbook="Fill up
buffer"
Options
• Off
• On
Factory setting
Off
If the fill-up buffer overruns, you can decide whether
you want to receive a diagnostic message from the
controller or not for each individual logbook.
Add another logbook Action Only if you want to create another data logbook
immediately.
You add a new data logbook at a later data using New.
Finished Action This allows you to exit the menu New.
Start/stop
simultaneously
Action Appears if you have created more than one data
logbook. With one click, you can start or stop recording
for all the data logbooks.
"Logbook name" The name of this submenu is based on the name of the
logbook and only appears once you have created a
logbook.
This menu appears several times if you have several data logbooks.
Path: Menu/Setup/General settings/Logbooks
Function Options Info