Endress+Hauser Fieldgate FXA42 страница 87 Скачать руководство пользователя

Страница: 87 / 118

Fieldgate FXA42

Operation

Hauser

The following settings are available:

Settings

Description

Enable SMS

Enable/disable the SMS functionality

SMS confirmation This setting defines the way that the Alarm SMS messages should be acknowledged so that

the SMS escalation stops. There are 3 possible SMS confirmation options:
• None: No acknowledgment is expected for stopping the SMS escalation.
• Automatic: As soon as an SMS delivery confirmation arrives, the SMS escalation is

stopped.

• Manual: The SMS escalation is stopped when one of the recipients sends an empty SMS

to the device.

SMS send interval Time to wait before attempting to resend an SMS in the event of a send error. Measured in

minutes.

Timeout

Time to wait before sending the SMS to the next recipient of the escalation. Measured in
minutes.

Max. send SMS

Maximum number of SMS send retries in the event of a send error.

SMS receiver list

Up to 5 different SMS recipients can be defined by providing the name and phone number

of each recipient. The SMS text that is to be sent is generated automatically. It contains the

information on the analog input for which "by alarm notification" was selected on the Data

Transmission Configuration page.

The phone number for the SMS recipients must contain the country code, prefixed

with the plus (+) sign, e.g. +49123456789. Separating characters are not allowed.

Event log messages

Messages relating to the "Messages" tab are created by the I/O Task of the device.

Sending data Email to <name>, address: <name>

A data e-mail has been sent to the recipient indicated.

Sending limit Email to <email>, address: <address>

A limit e-mail has been sent to the recipient indicated.

Sending alarm Email to <email>, address: <address>

An alarm e-mail has been sent to the recipient indicated.

Sent data Email message successfully

A data e-mail has been sent successfully.

Could not send data e-mail

A data e-mail could not be transmitted.

Email: No data recorded

No saved data to transmit via e-mail.

Email: Recording data

E-mail data has been recorded.

Email: Recording event

An event e-mail has been recorded.

FTP: Recording data

FTP data has been recorded.

Could not send file to FTP server

An FTP message could not be sent to the server.

Содержание Fieldgate FXA42























































































































Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды

Endress+Hauser Fieldgate FXA42, Руководство по эксплуатации

Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды