Endress+Hauser Fieldgate FXA42 страница 83 Скачать руководство пользователя

Страница: 83 / 118

Fieldgate FXA42

Operation

Hauser

The following settings apply to all I/Os for which data transmission is enabled:

• Data transmission interval: The interval in which the recorded data is to be transmitted.

Example: A value of 2 hours transmits the data at 00:00, 02:00, 04:00, 06:00 etc.

• Time offset: An offset that is added to the data transmission interval. Example: If an

interval of 2 hours and an offset of 1 hour are set, data will be transmitted at 01:00,

03:00, 05:00, 07:00 etc. Caution: This value may not be greater than the transmission

interval.

• Transmit now: Transmit all recorded data now.
All the inputs and outputs of the device are visible when you click . Settings:

• Data transmission: Enables the data transmission for the selected I/O.

• Data logging: Enables the data logging for the selected I/O.

• Data logging interval: The interval (in minutes) in which data is to be logged and

recorded.

Event log messages

Messages relating to the data transmission and data logging functionalities are created by

the I/O Task of the device.

Sent FIS data message successfully

A FIS data message was sent.

Error on parsing FIS data message

XML error when generating a FIS data message. Contact customer support.

FIS: Recording data

FIS data is being recorded.

FIS event message transmitted successfully

A FIS event message was sent.

FIS: Recording event

An event has been recorded.

HTTP error <HTTP-Error> occurred while sending FIS event message

HTTP communication error with the FIS server.

HTTP connection error occurred while sending FIS event message

An error occurred while trying to transmit an event message to the FIS server. Check the

device's connection status.

HTTP connection error occurred while sending FIS data message

An error occurred while trying to transmit a data message to the FIS server. Check the

device's connection status.

FIS data message transmitted successfully

The data message was correctly transmitted to the FIS server.

HTTP error <HTTP-Error> occurred while sending FIS data message

HTTP communication error with the FIS server.

Invalid FIS authentication

The device's access data to the FIS are not correct.

Logging data

The device is logging data.

8.4.11 Messages

The various communication options for the device can be configured via this page.

Содержание Fieldgate FXA42























































































































Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды

Endress+Hauser Fieldgate FXA42, Руководство по эксплуатации

Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды