Endress+Hauser Fieldgate FXA42 Скачать руководство пользователя | Manualshive

Страница: 99 / 118

background image

Fieldgate FXA42

Operation

Hauser

99

NOTICE

A complete device failure can occur if a live update process is interrupted.

If this happens, the device then does not transmit any more data and can no longer be

configured.

‣

Pay attention to the warning information on the

Update

screen of the user interface of

the device.

‣

It is important to wait until the update is finished. This can take a few minutes. Once

the update is finished, the device is automatically restarted and the device home page is

displayed in the Web browser.

‣

Ensure that the power supply to the device is not disconnected during the update

process.

An SD card with sufficient free space is required to download and unpack the new

firmware. The card must be inserted in the device. If this memory is not available, it is

not possible to run an update. An error message is displayed.
If the SD card is only inserted after start-up, the new firmware is not uploaded. In this

case, reboot the device with the SD card plugged in.
While the device is being programmed, the website may not be able to contact it.

Therefore communication errors might be reported. This is normal as long as the

error message does not persist for any length of time.
While accessing the SD card, the device may not be able to update the physical I/Os.

Formatting the SD card

The SD card included in the delivery is already formatted.

To be able to update the firmware of the Fieldgate FXA42, an SD card (card type: microSD)

formatted by the device itself must be provided. The SD card is formatted with the Power-

Loss-Protection (PLP) format. The PLP format is compatible with FAT16/FAT32.

Formatting the SD card for updates

1. Switch off the device (disconnect it from the supply voltage).
2. If an SD card is inserted in the slot, remove the SD card. Insert the new, unformatted

SD card in the slot.

3. Switch the device back on (connect it to the supply voltage).

 The Fieldgate FXA42 starts and formats the SD card. This process also creates

the

fxa42

directory into which the update package (*.cup) is subsequently

written.

FIS update

With this procedure, the update is triggered with the help of the FIS (Field Information

Server). The update then runs automatically on the device itself. This option is only

possible in conjunction with SupplyCare Hosting.

This procedure has the major advantage that Hauser can run an update

remotely (following prior agreement).

«
...
97
98
99
100
101
...
»

Содержание Fieldgate FXA42























































































































Отзывы:

Нет отзывов

Похожие инструкции для Fieldgate FXA42

Бренд: Pathport Страницы: 3

Бренд: RTA Страницы: 59

Бренд: NetComm Страницы: 2

Бренд: Grandstream Networks Страницы: 54

Бренд: RTA Страницы: 43

Бренд: Cisco Страницы: 276

Бренд: Sunfull Страницы: 2

Бренд: Zte Страницы: 13

MiBoxer ZB-Box2

Бренд: Mi-Light Страницы: 6

Бренд: iS5 Страницы: 184

FieldGate SWG50

Бренд: Endress+Hauser Страницы: 48

Бренд: BellEquip Страницы: 20

OfficeConnect 3C857

Бренд: 3Com Страницы: 2

3CRWE50194 - Home Wireless Gateway

Бренд: 3Com Страницы: 68

VOIP ALL SERIES

Бренд: EuroTech Communication Страницы: 77

Бренд: ADTRAN Страницы: 34

Бренд: Technicolor Страницы: 106

Бренд: 2N Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды