Endress+Hauser Fieldgate FXA42 Скачать руководство пользователя

Страница: 95 / 118

Fieldgate FXA42

Operation

Hauser

A static lease could not be added because there was no free space in the internal leasing

table. The message also shows the IP address of the static lease that should be added.

Adding static lease IP=<x> failed, wrong IP address

A static lease could not be added because the IP address indicated did not match the

network address. The message also shows the IP address of the static lease that should be

added.

8.4.15 Network address translation

The firmware of the device is able to perform network and port address translation (aka

NAT/PAT) in order to route traffic between a local (internal) and a global (external)

network. This feature can be used, for example, to give another device in the local network

access to the gateway's cellular modem Internet connection (global network). The device

must be connected to the Ethernet interface of the Fieldgate FXA42 for this purpose.

The following operations can be performed here:

• Enable NAT service

• Configure internal and external network interface

• Configure maximum number of mappings. Maximum number of mappings means

incoming and outgoing connections that can be routed.

IP forwarding is implicitly enabled because it is needed in order to use the

NAT function. If NAT is later disabled, IP forwarding will not be automatically

disabled. IP forwarding can be disabled in the network settings.

Dynamic mappings

Dynamic mapping is used to enable devices from the local network to access the global

network. Requests from the local network will be given the global IP address of the

Fieldgate FXA42 and the replies will be routed to the respective local device.
You have to configure how many minutes dynamic mappings will be valid (time to live).

Содержание Fieldgate FXA42























































































































Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды

Endress+Hauser Fieldgate FXA42, Руководство по эксплуатации

Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды