Endress+Hauser Fieldgate FXA42 страница 100 Скачать руководство пользователя

Страница: 100 / 118

Operation

Fieldgate FXA42

100

Hauser

Prerequisites for a FIS update

1. Insert an SD card in the slot of the device. The SD card must have been formatted

beforehand by the Fieldgate FXA42. An SD card with sufficient free space is required

to download and unpack *.cup files.

2. Tick the check box beside

Enable firmware update via FIS

if you have not already

done so. The check box can be found under

Settings

Update

, and then in the

FIS

Update

section.

3. In the

URL:

field, enter the following URL if a URL has not yet been entered:



https://weupcmasafgfirmware.blob.core.windows.net/fxa42/fxa42_current.cup

A FIS update can also be started manually by clicking the

Start update

button on the

Update

page.

Event log messages

Update due to FIS command

Starting update due to FIS command. The device is restarted after a successful update.

Firmware update via FIS request denied: Firmware update via FIS not enabled

The update request was denied. The "FIS update" setting is not enabled.

Firmware update via FIS request denied: Update/configuration already in progress

The update request was denied. An update is already in progress.

Updating the firmware manually
Preconditions for a manual update:

• The device is connected to a stable power supply.

• The SD card has been formatted by the device.

• The latest firmware has already been downloaded or can be downloaded via an Internet

connection.

Click the following link to download the latest firmware:

https://weupcmasafgfirmware.blob.core.windows.net/fxa42/fxa42_current.cup

The SD card included in the delivery is already formatted.

Содержание Fieldgate FXA42























































































































Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды

Endress+Hauser Fieldgate FXA42, Руководство по эксплуатации

Результаты поиска

Содержание Fieldgate FXA42

Отзывы:

Похожие инструкции для Fieldgate FXA42

Бренды по названию

Популярные бренды