Endress+Hauser Dosimag, Руководство по эксплуатации

Страница: 36 / 76

Commissioning Dosimag
36 Hauser
Measuring value at maximum
frequency
Failure mode
Failure frequency
Invert output signal
Parameter overview with brief description
Parameter Prerequsite Description Selection / User
entry
Factory setting
Operating mode – Define the output as a pulse,
frequency or switch output. • Off
• Pulse
• Automatic pulse
• Frequency
• Switch • Pulse/frequency/
switch output 1
submenu: Pulse
option
• Pulse/frequency/
switch output 1 to
2
submenu: Switch
option
Assign frequency output The Frequency option is
selected in the Operating
mode parameter (→  34).
Select process variable for
frequency output. • Off
• Volume flow Off
Minimum frequency value In the Operating mode
parameter, the Frequency
option is selected and in the
Assign frequency output
parameter (→  36), the
Volume flow option is
selected.
Enter minimum frequency. 0.0 to 10 000.0 Hz 0.0 Hz
Maximum frequency value In the Operating mode
parameter, the Frequency
option is selected and in the
Assign frequency output
parameter (→  36), the
Volume flow option is
selected.
Enter maximum frequency. 0.0 to 10 000.0 Hz 10 000.0 Hz
Measuring value at maximum
frequency In the Operating mode
parameter (→  34), the
Frequency option is selected
and in the Assign frequency
output parameter (→  36),
the Volume flow option is
selected.
Enter measured value for
maximum frequency. Signed floating-point
number Depends on country
and nominal
diameter
Failure mode In the Operating mode
parameter (→  34), the
Frequency option is selected
and in the Assign frequency
output parameter (→  36),
the Volume flow option is
selected.
Define output behavior in
alarm condition. • Actual value
• Defined value
• 0 Hz 0 Hz