Endress+Hauser Dosimag, Руководство по эксплуатации

Страница: 37 / 76

Dosimag Commissioning
Hauser 37
Parameter Prerequsite Description Selection / User
entry
Factory setting
Failure frequency In the Operating mode
parameter (→  34), the
Frequency option is selected
and in the Assign frequency
output parameter (→  36),
the Volume flow option is
selected.
Enter frequency output value
in alarm condition. 0.0 to 10 000.0 Hz 0.0 Hz
Invert output signal – Invert the output signal. • No
• Yes • Pulse/freq./switch
output 1: yes
• Pulse/freq./switch
output 2: no
Configuring the switch output
Navigation
"Setup" menu → Pulse/frequency/switch output 1 to 2
Structure of the submenu for the switch output
‣
Pulse/frequency/switch output 1
to 2
Operating mode
Switch output function
Assign diagnostic behavior
Assign limit
Assign flow direction check
Assign status
Switch-on value
Switch-off value
Failure mode
Invert output signal