Endress+Hauser Dosimag Скачать руководство пользователя страница 68

Страница: 68 / 76

Technical data

Dosimag

Hauser

A0003841

Supply voltage 24 V DC

Service adapter

Dosimag

Commubox FXA291

Computer with "FieldCare" or "DeviceCare" operating tool

The service adapter, cable and Commubox FXA291 are not included in the delivery.

These components can be ordered as accessories →  57.

16.12 Certificates and approvals

CE mark

The measuring system is in conformity with the statutory requirements of the applicable

EC Directives. These are listed in the corresponding EC Declaration of Conformity along

with the standards applied.
Hauser confirms successful testing of the device by affixing to it the CE mark.

C-Tick symbol

The measuring system meets the EMC requirements of the "Australian Communications

and Media Authority (ACMA)".

Ex approval

The devices are certified for use in hazardous areas and the relevant safety instructions are

provided in the separate "Safety Instructions" (XA) document. Reference is made to this

document on the nameplate.

Sanitary compatibility

• 3A approval and EHEDG-certified

• Seals → FDA-compliant

Pressure Equipment

Directive

• With the PED/G1/x (x = category) marking on the sensor nameplate, Hauser

confirms compliance with the "Essential Safety Requirements" specified in Annex I of the

Pressure Equipment Directive 97/23/EC.

• Devices not bearing this marking (PED) are designed and manufactured according to

good engineering practice. They meet the requirements of Art.3 Section 3 of the

Pressure Equipment Directive 97/23/EC. The range of application is indicated in tables 6

to 9 in Annex II of the Pressure Equipment Directive.

Measuring instrument

approval

Dosimag is suitable as an (optional) component for recording volume in legally regulated

measuring systems for AdBlue / DEF (Diesel Exhaust Fluid) in accordance with Appendix

MI-005 of the European Measuring Instruments Directive 2014/32/EU. Dosimag is

certified in accordance with OIML R117-1:2007 / OIML R117-2:2014 and has an MID

Содержание Dosimag













































































Результаты поиска

Содержание Dosimag

Отзывы:

Похожие инструкции для Dosimag

Бренды по названию

Популярные бренды

Endress+Hauser Dosimag, Руководство по эксплуатации

Результаты поиска

Содержание Dosimag

Отзывы:

Похожие инструкции для Dosimag

Бренды по названию

Популярные бренды