EMTEST PFM 200N100.1, Руководство пользователя

Страница: 39 / 43

EM TEST (Switzerland) GmbH PFM 200N100.1
User’s Guide
Ver. 1.12 39 / 43
10.5. Safety
DC Input Protection Max. Voltage ±100 V, limit > 100 VDC
Data Line Input Protection Max. Voltage ±40 V, limit > 40 VDC
Over Temperature NTC measurement on every connector
Over Current Electronic protection on every switch
Current Measurement Over current measurement at the output
10.6. Interfaces
Framebus
Function Control Bus (Daisy Chain) through AutoWave
Master AutoWave
Connector Type 15 pin D-Sub m/f
Monitor
Output DUT out, differential
Connector Type BNC on the front panel
Voltage Ratio 20:1
Bandwidth 10 MHz
10.7. Bus Systems (data lines)
CAN Bus - Low Speed Can 100 kbit
- High Speed Can 500 kbit
LIN Bus - LIN Bus 19200 Baud
FlexRay - FlexRay 10 Mbit
10.8. General
Dimensions 19"/3 HU, 448 mm x 536 mm x 154 mm
Figure 10.1
Weight 12.6kg
Mains 100 V - 265 VAC, 50/60 Hz
Fuses 2 x 2 AT (5 x 20 mm)
10.9. Environmental
Operating Temperature 23 °C ±5 °C
Storage Temperature 10 °C to 35 °C
Relative Humidity 25 % to 75 %, non-condensing
Air Pressure 86 kPa (860 mbar) to 106 kPa (1,060 mbar)