EM TEST (Switzerland) GmbH
PFM 200N100.1
User’s Guide
Ver. 1.12
17 / 43
4.3.2. Back
Figure 4.10
Input for DUT Power
Voltage supply from a sour using a flexible
connector with 4 mm (male) / 6 mm (female)
connectors
Current capabilities:
4 mm male:
max. 32 A
6 mm female: max. 100 A
Figure 4.11
Frame Bus
Daisy Chain Bus with 15 pin Sub-D
male /female connector.
This interface is used to control various EM Test
devices.
Figure 4.12
Power and Fusing
The main on/off switch of the PFM 200N100.1 acts as the mains input
and contains a mains filter and fusing.
Mains: 100V - 265V, 50/60 Hz
Fuse: 2 x 2 AT, 5 x 20mm
