EM TEST (Switzerland) GmbH
PFM 200N100.1
User’s Guide
Ver. 1.12
38 / 43
10.
Technical Data
10.1. Switch for Power Lines
Electronic Switch
Two switches in circuit:
- DC + Line
- DC - Line (return line)
DUT Voltage
± 100 VDC
DUT Current
100 mA to 100 A, @ 25 °C
Switching Behavior
Bidirectional
Switch Impedance
< 50 m
Ω
Switching Time
< 1 μs (rise/fall time) typ. 200 ns
Repetition Time
10
μs - 1 h, (≥ 90% duty cycle)
Pulse Width td
1 μs; 2μs - 1 h
Inrush Current
400 A for 200 ms
Safety
Short-circuit safe to 400A
10.2. Switches for Signal and Data Lines
Channels
16 independently switchable
DUT Voltage
Max. ± 40 VDC
DUT Current
100 μA to 2 A, per Channel, @ 25 °C
Switching Behavior
Bidirectional
Switch Impedance
< 500 m
Ω
Switching Time
< 1 μs (rise/fall time)
Repetition Time
500 μs - 1 h
Pulse Width td
1 μs; 2μs - 1 h
Bandwidth
50 MHz / 3 dB
Inrush Current
5 A for 200 ms
Safety
Short-circuit safe
Connector Type
2 x PHOENIX, DFMC Adapters,
1.5 mm2, with a push-in locking connection
10.3. Switchable Internal Loads for Battery Lines
Switching
Switching loads between lines ( DC+ und DC-),
Shorting Switch S2
< 100 mΩ according to LV 124 (2013)
Internal Switch S3
100
mΩ
Internal Switch S4
Low
Internal Switch S5
High
10.4. Triggering
Trigger Output
BNC on the front panel,
Automatic triggering of events,
Trigger for Oscilloscope,
15 V negative edge
Trigger Input
BNC on the front panel,
External triggering of events,
Pull down
