EM TEST (Switzerland) GmbH
PFM 200N100.1
User’s Guide
Ver. 1.12
11 / 43
3.4.3. Software Installation and Setup
To install the AutoWave.control
, please consult the software user’s guide.
After installation use the Hardware Configuration tool to setup the AutoWave.
A
Select
Setup / Device
to open
the System Configuration.
Figure 3.12
B
System Configuration
Here you can setup the software for
the correct system configuration.
1
Choose the selection
Select System Configuration
to open a typical configuration.
2
Select
System 7
or System 8
or the one that most accurately
reflects your system.
3
Choose
OK
to close this
window.
Figure 3.13: System Configuration for a Typical PFM 200N100.1 Setup
C
Device Setup
Here is where you enter the details
for the device.
1
First, select
AutoWave
as the device to be edited.
2
Enter the
Serial Number
in the
list.
3
Enter the date from the
delivered certification.
4
Select the
Interface
to the
computer: GPIB or LAN.
5
Enter the details for the
VDS
.
Figure 3.14: Device Setup for AutoWave
