EM TEST (Switzerland) GmbH
PFM 200N100.1
User’s Guide
Ver. 1.12
19 / 43
6.
Testing According to LV 124 and LV 148 Using the AutoWave.control Software
Tests according to E-10, E-13 and E-14 uses an AutoWave for control. The user must use
AutoWave.control version 5.6.0 or newer.
6.1.
Locating the Standard Tests for LV 124 and LV 148
LV 124 and LV 148 in the Standards Library
The standards LV 124 and LV 148 are found in
the Standards Library under Automotive
– OEM.
Each standard contains various versions.
Figure 6.1: Standards list for LV 124 and LV 148
Selecting a Test
The user may choose the needed version and
test routine. Tests that do not user EM Test
equipment will not be found here. Each test step
is listed individually.
The example in Figure 6.2 the selection of a test:
LV 124(2013-02), E-10 Test Case 1 that includes
a dropout from 100ms to 2s.
Preview
In the right window of AutoWave.control a
preview of the selected test is displayed including
some general information about the selected test.
The picture in the preview window shows the test
run in a simplified way. The user has the
possibility to check the voltage profile of the test
run in a visual way.
Figure 6.2: Standard List for LV 124 Test Case 1 & 2
More Information about the Preview Window
Name:
Standard name of the selected test
Phenomenon:
Type of test (Voltage profile)
Duration:
Duration of the entire test
Channel:
Channel (AutoWave output)
Cycles:
Number of Cycles
