EM TEST (Switzerland) GmbH
PFM 200N100.1
User’s Guide
Ver. 1.12
15 / 43
4.3.
Description of the Functions of the Device
4.3.1. Front
Figure 4.3
Trigger IN
Trigger to start an event
The trigger signal starts an interrupt. The
trigger can be set in the AutoWave software.
-
Manual at Start
-
Manual each Cycle
-
Manual each Iteration
Figure 4.4 Trigger IN selection
Figure 4.5 Schematic - Trigger IN
Signal: 5 V, neg. edge
Delay: 100 µs
Jitter:
Figure 4.6
Trigger OUT
Output signal synchronized with the internal
switching control signal for an external
oscilloscope
Signal: 12 V, pos. edge
Current: 100mA
Delay: same as the switch control signal
Jitter:
Figure 4.7 Trigger OUT
selection
Figure 4.8
Monitor OUT
Allows monitoring of the output of the Test
Supply
Measurement: differential measurement
Ratio:
1:20
Amplitude:
10 Vpp, ± 5 V
Accuracy:
± 5%
Bandwidth:
10 MHz
