Eltroplan REVCON RLD Скачать руководство пользователя страница 7

Страница: 7 / 98

Preface and general information

6 Operating instructions RLD

ELTROPLAN

REVCON



Elektrotechnische Anlagen GmbH

1.4

EC-Directives / Declaration of conformity

What is the purpose of EC-Directives?

The EC-Directives have been drawn up by the European council to define common tech-

nical standards and certification procedures within the European Community. At the mo-

ment there are 30 EC-Directives for product sectors. The directives are or will be convert-

ed in national laws by the member states. If a certificate is conferred in one member state,

it is valid in all other member states automatically.

The directives only describe the basic standards. The technical details are or will be de-

scribed in harmonized European standards.

What is the meaning of the CE-marking

After a conformity-assessment-procedure the conformity with the standards of the EC-

Directives is certified by fixing the CE-marking. Within the EC there are no trading obsta-

cles for a CE-marked product.

Power feedback units with CE-mark themselves are compliant with the Low-Voltage Di-

rective only. For observing the EMC Directive recommendations are made.

Содержание REVCON RLD



































































































Результаты поиска

Содержание REVCON RLD

Отзывы:

Eltroplan REVCON RLD, Руководство пользователя, Страница: 7 / 98

Результаты поиска

Содержание REVCON RLD

Отзывы: