Eltroplan REVCON RLD Скачать руководство пользователя страница 4

Страница: 4 / 98

Preface and general information

Operating instructions RLD 3

ELTROPLAN

REVCON



Elektrotechnische Anlagen GmbH

Preface and general information

1.1

About these Operating Instructions



These Operating Instructions help you to work properly on and with the power feed-

back units REVCON



RLD. They contain safety information which must be observed

and information which are necessary for an undisturbed operation of the units together

with the exploitation of all the advantages of the system.



All persons who work on and with the power feedback units REVCON



RLD must

have the Operation instructions available and observe all relevant notes and instruc-

tion.



The Operating Instructions must always be in a complete and perfectly readable state.

1.1.1

Terminology used

Power feedback unit

For „Power feedback unit

„

REVCON



RLD“ in the following the term „Power feedback

unit“ is used.

Controller

For the frequency inverter which is used together with the power feedback unit in the fol-

lowing the term „Controller“ is used.

Drive system

For a drive system with power feedback units, controller and other components of the drive

system in the following the term „Drive system“ is used.

Содержание REVCON RLD



































































































Результаты поиска

Содержание REVCON RLD

Отзывы:

Eltroplan REVCON RLD, Руководство пользователя, Страница: 4 / 98

Результаты поиска

Содержание REVCON RLD

Отзывы: