EDWARDS SYSTEMS TECHNOLOGY IRC-3, Руководство по программированию

Страница: 60 / 284

2.16 Programming Manual
Defining RZB Panels
1) Entry Menu > 3) Enter RZB Panels
In this step, it is necessary to identify all of the RZB panels in the
system. Most of the zone assignments are done automatically by the
system. The RZB panel emulates sensors and modules on the ZAS-1S
line. The first eight zones (IN1 through IN8) appear to the system as
sensors while the IN/OUT1 through IN/OUT4, pwr supv, and K5 and
K6 appear as modules. Inputs IN1 through IN8 are always located on
the sensor address (lowest ZAS-1S address), while the other addresses
are located on the module address (highest ZAS-1S address).
After selecting 3) Enter RZB Panels, the following window is displayed:
Four options are available in the RZB Panel menu.
Add RZB Panel
1) Entry Menu > 3) Enter RZB Panels > 1) Add RZB Panel
After selecting 1) Add RZB Panel, you must select the start address of
the first RZB panel (the first device address of the sensor side of the
firealarmresources.com