EDWARDS SYSTEMS TECHNOLOGY IRC-3, Руководство по программированию

Страница: 265 / 284

Operations Manual 15
• Key in “7“ (Seqnc) and press the Enter button. The display shows
the following:
Enable a Sequence
Enter Sequence # (nnnn) ->_
• Key in the 4-digit sequence # that you want to enable and press the
Enter button.
The selected sequence is enabled. The display returns to normal.
Disable Functions
Disables a zone (except output zones), zone message, time control, data
line, panel, action, or sequence.
Notes
1. A level 1 or 2 password is required to disable system functions.
2. Completion of an enable/disable function returns the display back to
the ENABL/DSABL menu shown above. Additional sub-menu
selections can then be made.
• Press the ENABL/DSABL button. The display shows the following:
1) Enable 2) Disable
Enter # Choice ->_
• Key in “2“ (Disable) and press the Enter button. The display shows
the following:
1) Zone 2) Znmsg 3) Tmctrl 4) Datlne 5) Panel
6) Actn 7) Seqnc
Enter Choice->_
• Key in the appropriate password and press the Enter button. The
display shows the following:
Enter password level 2 ->_
From this point forward, the Disable procedure is the same as the
Enable procedure explained in previously.
Notes
1. Disabling a zone, zone message, data line, panel, action, or
sequence increments the DP (Disabled Points) counter.
2. Device/zone points that are disabled manually will sound a trouble
buzzer and illuminate the trouble LED.
3. Disabling through the program will not sound the trouble buzzer,
but will increment the DP counter.
4. You CANNOT disable an Output.
firealarmresources.com