EDWARDS SYSTEMS TECHNOLOGY IRC-3, Руководство по программированию

Страница: 119 / 284

Programming Manual 3.7
it will not cause a trouble condition; it will increment the active points
(AP) counter; it will sound the trouble buzzer, and requires
acknowledgment at the CM1N. You may disable the status zone's
message so it will not print or be displayed at the CM1N. When a point
is identified as a status zone, it may still contain a response list to
activate outputs or actions in the normal manner. This feature will
normally be used in AHU monitoring, door control, etc.
9011 - First System Alarm:
This action is automatically activated when the first alarm is detected in
the system.
9012 - Second System Alarm:
This action is automatically activated when the second alarm is detected
in the system.
9013 - Third System Alarm:
This action is automatically activated when the third alarm is detected
in the system.
9014 - Fourth System Alarm:
This action is automatically activated when the fourth alarm is detected
in the system.
9015 - Fifth System Alarm:
This action is automatically activated when the fifth alarm is detected in
the system.
9016 - Sixth System Alarm:
This action is automatically activated when the sixth alarm is detected
in the system.
9017 - Seventh System Alarm:
This action is automatically activated when the seventh alarm is
detected in the system.
9018 - Eighth System Alarm:
This action is automatically activated when the eighth alarm is detected
in the system.
9019 - Ninth System Alarm:
This action is automatically activated when the ninth alarm is detected
in the system.
9020 - Tenth System Alarm:
This action is automatically activated when the tenth alarm is detected
in the system.
9021 - 9052 - CM2N Regenerative Panel List:
Each CM2N panel defined in Action 9006 will use an action of this
series to list CM2N panel addresses. This list is the CM2N(s) panel
address(es) that will communicate with each other when they lose the
firealarmresources.com