manualshive.com logo in svg

EDWARDS SYSTEMS TECHNOLOGY IRC-3, Руководство по программированию

Поделиться
Скачать
EDWARDS SYSTEMS TECHNOLOGY IRC-3 Скачать руководство пользователя страница 59

Programming Manual

2.15

H) External Command Set (This item is NOT AVAILABLE for
CM2(N) panels)

This option puts the CM1N RS-232C port into a communication mode
for use with interactive versions of the CCA, CGP, or a third party
system with software capabilities for interactive operations.

Note:  

This mode, when enabled, eliminates use of a printer option from

the CM1N RS-232C port. This feature is currently available for the
CM1N RS-232C port only. The printer port MUST be enabled.

I. Reserved for future use.

J. USA/European (This item is not displayed for CM2(N) panels)

This option supports a European mode of operation. A feature of this
mode is the ability of a system to discern between an alarm, a
supervisory short condition, or a supervisory open condition on an
alarm circuit.

K. SAN-COM (This item is not displayed for CM2(N) panels)

This option will enable/disable automatic operation of a SAN-COM
module in a SAN-4, SAN-8, or RSAN-6. When the SANCOM is
ENABLED in the CM1N Panel Configuration menu of the Data Entry
Program, it will operate and annunciate the same as the Reset, Alarm
Silence, Drill/All-Call, and Lamp Test switches on the CM1N control
panel. All panel addresses identified as annunciators will have their first
eight inputs and first eight outputs preprogrammed.

(For example, if the Drill/All-Call switch on the CM1N front panel
display is depressed, the red LED of the Drill/All-Call switch will
illuminate, as well as the red LED of the SANCOM Drill/All-Call
switch.)

L. Exit (This is item "E)" for CM2N Configuration Menu)

Returns to the previous menu.

firealarmresources.com

Содержание IRC-3





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды