EDWARDS SYSTEMS TECHNOLOGY IRC-3, Руководство по программированию

Страница: 112 / 284

2.68 Programming Manual
DOS Shell
When in the 3) Data Transfer Menu, the DOS shell is available as
shown in the screen below:
This item allows you to exit the IRC-3 Data Entry Program, but still
keep your entered data in the PC’s RAM. This will give you the ability
to perform DOS functions without exiting your work. You may return
to the data entry program at any time by typing EXIT at the DOS
prompt.
Note:
Before you type EXIT at the DOS prompt, make sure you are
located on the same disk drive and in the same sub-directory as the
IRC-3 Data Entry Program.
When selecting 7) DOS Shell, the following screen is displayed:
firealarmresources.com