EDWARDS SYSTEMS TECHNOLOGY IRC-3, Руководство по программированию

Страница: 130 / 284

3.18 Programming Manual
a. The IRC-3 data entry program must be used to create an
individual database file for EACH CM2N that will
communicate to a serial annunciator in the regenerative
network. This data file must have three entry requirements:
• Place a ZB0-8 into the CM1N panel configuration
• Define the panel address of the serial annunciator(s) that the
CM2N will need to communicate with in the regenerative
mode.
• Define all the switch input definitions as though this were the
main program.
b. Compile each data file to obtain the proper Definition Transmit
File (extension = .D01)
c. Leave the IRC-3 data entry program menu and return to the
DOS command line.
d. From the DOS command line prompt, use the SEND command
to download the CM2N transmit files AND the SAN input
definition file. Download directly to the CM2N.
Example: at the C> prompt, type in SEND FILENAME.PXX
FILENAME.DXX ANNFILE.D01 and hit Return.
FILENAME is the IRC-3 data entry database file where all the primary
programming was entered and stored.
XX denotes the CM2N panel address where the SAN zone responses
must reside.
ANNFILE is the individual file created in the IRC-3 data entry program
specifically for the serial annunciator that must communicate with
CM2N panel XX. This file contains the zone responses for the serial
annunciator.
firealarmresources.com