4
1.0 System Introduction
1.1 Preface
Formula 1 is the single-step laundry solution for on-premise laundry
customers. The Formula 1 system comes equipped with one main pump
and three delivery valves to service up to three washers. The system
automatically makes a use-solution from a concentrated Formula 1
product. This use-solution is then delivered to the washers automatically
as requested. Formula 1 is an all-in-one formula; however the system has
an optional pump cabinet for delivering a finishing product or sanitizer if
desired.
FORMULA 1 IS FOR USE WITH FORMULA 1 PRODUCTS
ONLY. OTHER CHEMICALS MAY HARM THE DISPENSER.
Formula 1 should ideally be used with 35 lb to 150 lb. commercial
washers. Total washroom capacity should not exceed 300 lb.
DO NOT
USE FORMULA 1 IN SINGLE WASHER ACCOUNTS.
1.2 System features
-
3
washers
-
2
formulas
-
heavy soil boost
-
load counter, heavy soil counter & capsule log
-
low voltage washer connections
-
pump run time counter
-
visual & audible low product alarm
-
1 concentrated p optional finishing product
-
programmable delay
-
universal washer signal input
-
bilingual user prompts
-
automatic solution mixing (recirculation)
2.0 Installation requirements
Water supply
- Hot and cold, min 10 psig dynamic (pressure gauge on assembly), ¾”
male garden hose connection
- Hot water temp, min 100
°
F, max 145
°
F.
- NOTE: accounts with hot water >145
°
F require tempering valve kit
9259-1043
Electrical
- 120 VAC, 60Hz, 3 Amp
Floor space
- 30” W X 72”L X 54”H (for dispenser access)
Drain
- Floor drain or drain trench
