29
the numbers as described in previous sections, and use <Right> or <Left> arrow
keys to move between data fields.
Once the amount is entered correctly, press <Ent> to save the new value. NOT
pressing <Ent> will discard the changes and default back to the factory settings.
Then press <Esc> to exit to the previous menu.
•
The menu screens for Washer #2 and Washer #3 are designed in the very same
configuration.
Always press <Ent> key to save the newly programmed data.
NOT pressing <Ent> will discard the changes and default back to the factory
settings.
Press <Esc> to exit to the previous menu.
•
Selecting
“Reset to Defaults?” will display the following screen:
Reset ALL to Default
F5 = Yes (Esc = No)
Pressing <Esc> will exit to the previous menu.
Pressing <F5> key will reset all programmed amounts to the factory settings,
which are 5 sec. Delay, 25.0 oz Pump (for Detergent), and 1.0 oz Pump (for
Auxiliary product).
3: Records Menu:
Æ
Esc=Previous Menu
Sys Software Rev.?
Clear All Det Dose?
Nr. Caps. Used:
Clear Capsules Log?
Main Pump Log:
New Pump Installed?
Use the <Up> or <Down> arrow keys to move to the desired option.
Pressing <Ent> key to select the desired option.
Pressing <Esc> key to move back up one screen.
•
Selecting
“Sys Software Rev.?” will display the following screen:
Ecolab, Inc. (C)
Sys Software R 1.XX
(XX=51 at the time of this writing)
Pressing <Esc> key will exit to the previous menu screen.
•
Selecting
“Clear All Det Dose?” will display the following screen:
Clear Load Counts?
