25
Wash3 Form#1 Name
Wash3 Form#2 Name
The names of formulae can be edited. There are 2 formulae for each of the 3
washers. The default names are Formula 1 and Formula 2.
Use the <Up> or <Down> arrow keys to move to the desired option.
Press <Ent> key to select the desired option.
Press <Esc> key to move back up one screen.
Selecting
“Wash1 Form #1 Name” will display the following screen:
W1F1:Formula 1
Ent to Save/Esc=Exit
Line 1: the name of the formula can be edited for up to a maximum of 14
characters, including space and/or special characters (+ - * / = ( ) from the <Up>
arrow; and . ? : ; , ‘ from the <Down> arrow keys). The default name is “Formula
1”, with the cursor as a solid underline bar under the first letter “F”.
To edit/change the name of the formula, press <Ent>. Note the cursor is now
changed to a blinking darker square, ready to accept the new data. Use the soft
keys to toggle through the alphabets (capital and small letters) and/or numbers
as described in previous sections, and use <Right> or <Left> arrow keys to move
between data fields.
Once the name is entered correctly, press <Ent> to save the new name. Then
press <Esc> to exit to the previous menu. NOT pressing <Ent> will discard the
changes and default back to the factory settings.
Other selections for other formula and/or Washer X have the same configuration
as described above.
2: Formula Progr. Menu:
Æ
Esc=Previous Menu
Program Wash #1
Program Wash #2
Program Wash #3
Reset to Defaults?
Pressing <Esc> key will exit to the previous menu screen.
•
Selecting
“Program Wash #1” will display the following screen:
Æ
Esc=Previous Menu
Wash1 F1 Deterg
Wash1 F1 AuxPump
