11
The dispenser automatically alternates between hot and cold water during
the fill cycle. Hot water >145
°
F can cause separation of the detergent
use-solution and can adversely affect the enzymes contained in some
Formula-1 products. For installations with hot water in excess of 145
°
F,
tempering valve kit 9259-1043 must be ordered. The following
instructions assume hot water temperature <145
°
F.
5.3.5.1 Hose Plumbing Method
The following steps describe the water supply connection using the
rubber hose plumbing method.
1.
If necessary, use the ‘Y’ hose-connectors (located in
installation kit) and provide hot and cold water sources for
the dispenser.
2.
Route one of the provided 15’ hoses from the hot water
source to the fitting at the regulator assembly. (See fig
5.3.4.1)
3.
Repeat step 2 with the cold water line.
Fig 5.3.4.1
