Zero 88 FLX Lighting Console
–
User Manual
Page
43
of
64
Default values
The Default values for fixture parameters are the values
that are output when the fixture is
“
released
” (ie, not
currently being used / controlled).
The initial values for all of these settings are taken from the
Zero 88 fixture library. They are set to values that will
produce an open white beam (no gobos or effects) at a
central position (Pan and Tilt at 50%) but with an intensity
of 0%.
These values can be edited on an individual fixture or
group basis as required
(as described on page 42 under
).
“Default” values within “Edit Fixtures”
Home values
The Home values for fixture parameters are the values that
are output when the fixture is
“
homed
”
or
“
highlighted
”
.
The initial values for all of these settings are the same as
“Default”, but with an intensity of 100%.
These values can be edited on an individual fixture or
group basis as required
(as described on page 42 under
).
Topset values
The Topset value for each parameter is the maximum
value which can be reached when adjusting the fixture
using the wheels, command line, etc. This is set to a
default value of 100%.
These values can be edited on an individual fixture or
group basis as required
(as described on page 42 under
).
Alignment (inverting and swapping pan & tilt)
ZerOS is capable of making adjustments to your fixtures to
take into account their rigging position.
Inverting Tilt can be particularly useful if you’ve rigged
Front of House fixtures the opposite way around to those
onstage, or you have some fixtures sat on the floor.
Inverting Pan can be particularly useful if you wish your rig
to be symmetrical, so the beams move into and away from
Centre Stage rather than all in the same direction.
Swapping Pan and Tilt can be particularly useful if a fixture
is rigged on its side. In this function, any values defined for
Pan will be output on the Tilt channel(s), and any values
defined for Tilt will be output on the Pan channel(s).
Use the touch screen, the arrow keys or a curser to move
to the individual field to edit, or use the ALL row to select
the value for all fixtures currently being displayed. Press
Enter (or double click / tap) to enter the field and choose
between
Yes
or
No
.
With a fixture’s home position of Pan and Tilt at 50%,
inverting or swapping these parameters won’t make a
instant visible change. Therefore, it’s
recommended that
before editing these values, you select all the fixtures and
move them all to a different position. Now, as you change
the values within “Alignment”, you’ll see the beams
updating live.
