Zero 88 FLX Lighting Console
–
User Manual
Page
26
of
64
Fade Time
The time with which FLX fades the attributes that move
on dark.
Delay Time
The time the FLX waits after a fixture reaches blackout
before move on dark kicks in.
Don’t Move
Colour / Beamshape / Position / Effect
This option allows you to disable a specific attribute
from moving in dark across the whole playback. By
default, only “Don’t Move Effect” should be enabled.
Playback Setup window
–
Advanced tab
Advanced
The various options are described below:
Renumber
This option allows you to renumber all the programmed
cues in the playback. Press
the
Renumber
soft key. This brings up the Renumber
Cues dialogue box. Enter the required Start Number
and Increment in the fields provided and then select
the
OK
button in the window.
Block
When this option is selected, all the cues in the cue
stack are changed into block cues, ie this programs and
tags all the parameters at the values they would
normally be output at when the cue is played back.
Unblock
When this option is selected, any parameters that are
recorded at the same value as in the previous cue are
untagged, ie turns block cues into tracked cues.
Allow Stomping
“S
tomping
”
occurs when a playback takes control of all
the channels from another playback, and so releases
that playback.
Page Lock
Page Lock means this playback will not change when
the Playback Page is changed, so it is always available.
This means you can no longer access the playbacks on
other pages which would normally be accessed via this
physical fader, until Page Lock is disabled.
Stack Name
This is an alternative method of naming a Playback,
rather than using syntax.
