Access Power Solutions Installation and Operation Guide (APS6-300/500 and APS12-300 Series)
8
Copyright © 2007-2013 Eaton Corporation. All Rights Reserved.
IPN 997-00012-49G May 2013
System Controller
The SC200 or SC100 system controller provides control, communications and alarm functions.
The system controller is supplied pre-configured. Configuration changes can be made with the
keypad, or via a PC connected to the USB connector (SC200) or RS232 (SC100) connector. Or
changes can be made remotely (see External Communications on page
For basic operating information see System Controller on page
. For further details refer to
the System Controller Operation Handbook (see Related Information on page
See Troubleshooting on page
for details of system controller alarms.
SC200 System Controller
The SC200 system controller is an advanced control and monitoring solution which provides a
full suite of communications options, including built-in Ethernet interface, Web server, and
SNMP agent.
Alarm notifications may be by Email, SNMP traps, SMS text messaging, dial-out to
PowerManagerII remote monitoring software, or relay contact closures.
Power on LED (green)
Minor alarm LED (yellow)
Critical/Major alarm LED (red)
Color LCD
Soft keys (2)
Navigation keys (4)
USB 1.1 connector (12Mb/s)
Retaining screw
Power and system
communications connector
RS232 connector
Ethernet connector and
status LEDs
