Eaton APS12-300 Series, Инструкция по установке и эксплуатации

Страница: 28 / 120

Access Power Solutions Installation and Operation Guide (APS6-300/500 and APS12-300 Series)
20
Copyright © 2007-2013 Eaton Corporation. All Rights Reserved.
IPN 997-00012-49G May 2013
Installation Tasks
Before starting the installation, review the following information:

Required Equipment and Tools on page 69

Warnings and Cautions on page 16

Inspecting the Equipment and Reporting Damage on page 18
Complete the Installation tasks in the following order:
Task Description Reference
1 Check the AC Supply and Earthing See details on page 20
2 Prepare the APS See details on page 23
3 Connect the AC Supply Cable See details on page 26
4 Mount the APS in the Rack See details on page 28
5 Connect the dc Load and Battery Cables See details on page 29
6 Install the Batteries See details on page 30
7 Mount the Battery Temperature Sensor See details on page 31
8 Connect External Input/Output Cabling (if required) See details on page 32
9 Connect Additional Input/Output (if required - SC200
only) See details on page 33
10 Connect to the AC Supply Point See details on page 33
For installation of external communications see Communications Options in the System
Controller Operation Handbook.
Task 1 - Check the AC Supply and Earthing
It is important that the ac supply for the Access Power Solutions dc power system includes the
correct levels of protection.
Step 1 - Check transient voltage protection at the site
1
Confirm that there is a transient protection plan (compliant with IEC 61643-12)
for the site.

For more information see Transient Protection on page 87 .
2
If necessary, install suitable transient protection.