Dynapac PL2000F, Инструкция по эксплуатации

Страница: 71 / 283

Machine description
60 4812313240.pdf
2017-12-1
Pos. Designation Symbol Brief description
11
Console
selector
The switch is located on the left and right
console respectively. When pressed, the LED
lights up, and the corresponding console enters
into controlling mode, all switches in it are
available, while the others are unavailable. The
LED lighted below indicates which console is
activated. And only one can be worked at a time.
12 ECO mode
At the touch of the button, the planer enters into
ECO mode, and LED lights on. Exit and enter
other mode by pressing switch 13 or 14.
The engine speed can be set in the display in
ECO mode.
When in ECO mode, engine speed value will be
within the scope of 1700 – 2100 rpm.
This engine speed will be activated when the
drum is on and the machine is moving forward.
13
Milling drum
speed set 1
The engine speed is 1900rpm by pressing this
button by pressing the button; meanwhile the
indicating light is switched on.
This engine speed will be activated when the
drum is on and the machine is moving forward.
14
Milling drum
speed set 2
The default setting is gear II, engine speed 2100
rpm when ignition.
This engine speed will be activated when the
drum is on and the machine is moving forward.