Dynapac PL2000F, Инструкция по эксплуатации

Страница: 13 / 283

Introduction
2 4812313240.pdf
2017-12-1
Intended use
PL2000F is mainly intended to be used for roadworks:

to partially or completely remove asphalt,
asphalt based and/or cement layers

to remove distortions in the forms of track
grooves, lateral bulges, lateral warps

to recreate a proper surface

to implement roughing up and striping work
For this, the underlying base layer must be robust
enough to withstand movement of the cold planer.
The transport of outsiders is expressly forbidden , as
using the cold planer as a traction mechanism or lifting
device.
The intended usage also includes compliance with
operating, transport, maintenance and repair
conditions specified in the operating instructions.
The machine is not designed for any type of usage not
described in the intended usage section. The
manufacturer is not liable for such instances of use.
The operator alone bears all risks for such usage.
When in doubt, contact the manufacturer.
Warning symbols
WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored
CAUTION ! Marks a danger or hazardous procedure
that can result in damage to the machine or property
if the warning is ignored